DIGITAL UNIVERSAL CARBIDE METER

Same to mod. A028, but with digital manometer for more accurate readings (0,1%) with pressure and temperature display.
Supplied complete.

UNIVERSAL CARBIDE METER

For the rapid and accurate determination of moisture content in sand, gravel, aggregates, soil etc, based on the calcium carbide method.
It is possible to vary the sample weight from 3 to 100 g for the complete reaction between sample and carbide with accurate moisture measurements from 0 to over the 20%. 
The glass ampoule containing the calcium carbide is broken when the bottle is closed and shaken, granting better accuracy to the test.
The instrument comprises the testing bottle with manometer, small balance, 20 ampoules of reagent, accessories, case.

Dimensions: 520x340x140 mm.
Weight: 6 kg approx.

MICROWAVE OVEN

Used for speed drying purposes, moisture determination, conditioning.

Power supply: 230 V 50 Hz 1ph 700W
Internal dimensions: 380 x 340 x 300 mm approx.
Weight: 28 Kg

WARM AIR DRIER

Warm air drier, for general laboratory purposes, to dry soil and aggregate samples.

Power supply: 220-240V 1 ph 50 Hz 1200 W

WAX MELTING POT

Used to melt wax and other materials, it maintains heat from room temperature to max. 350°C.
Complete with adjustable thermostat range +50° C. to +350° C., accuracy ± 1,5° C., pilot lamp fully isolated to CE requirements.

Capacity: 5 litres
Internal dimensions:Ø 200x160 mm.
Power supply:230 V 50/60 Hz 1ph 800W
Weight: 3 kg

HOT PLATE WITH MAGNETIC STIRRER

Complete with thermoregulator for temperature adjustment and magnetic stirrer with electronic adjustment from 100 to 1200 rpm.

Suitable for tests in distilled water with softening point between +30°C. to +80°C.
Alternative version to mod. B074 + B074-01

Power supply: 230V 1ph 50-60Hz 700W
Weight: 4 kg approx.

QUANTAB CHLORIDE STRIPS TYPE 1175

Quantab Chloride Titrator Strips, type 1175, range 0,005% to 0,1% (30 to 600 ppm) Na Cl.
Pack fo 40 strips.

MUFFLE FURNACE SINGLE PHASE 1200°C

Used to determine the loss on ignition of cement and lime; chloride, carbon dioxide, alkali content of cement.
Max. temperature: 1200°C.
The heat insulation is made of ceramic fibre.
Heating muffle, unthreaded from the back, in an only cast of refractory.
Lateral opening door with pressure wedge and with a stop device for electric feeding when it opens.
Control panel is positioned on the furnace bottom containing a digital visualized thermoregulator and magnetic thermic for protection system.

Inside dimensions (wxdxh): 145 x250x100 mm
Overall dimensions: 500x650x650 mm
Power supply: 230V 1ph 50/60Hz 4200W
Weight: 70 kg

MUFFLE FURNACE 1100°C

Designed for high temperature heatings.
Structure made in sheet-steel, furnace frontal in diecasted steel to avoid the aggretion of the acid smokes.
The thermic insulation is in ceramic fibre to avoid the smallest heating leakage and so it takes a great energetic saving. 
Electronic visualized regulation of the tem-perature obtained by a digital thermostat.
This furnace is also used for the determination of residual of mineral matter by incineration of bituminous mixtures to EN 12697-1 clause C Standard.

Max. temperature: 1100° C.
Inside dimensions: 210x320x145 mm
Outside dimensions: 500x750x650 mm
Power supply: 230V 50/60 Hz 1ph 3900W
Weight: 88 Kg approx.

OVEN, NATURAL CONVECTION

Natural convection, digital thermoregulator-indicator. 
Designed for drying, baking, conditioning and moisture determination. 
Sturdy manufacture, double walled with 60 mm thick glass fibre for thermal insulation. 
Exterior front part is stainless steel made; while interior chamber, grid shelves and external walls are made from zinc coated steel.
Temperature from ambient to 200°C. is controlled by a digital thermoregulator-indicator. 
The oven is equipped of a dual safety thermostat with higher thermic threshold to prevent accidental over-temperatures, and to ensure safe working conditions. 
The oven is supplied complete with two grid shelves easily removable and that can be positioned at various heights, pilot light, exhaust holes for fast cooling.

Power supply: 230V 50-60Hz 1ph
Inside dimensions: 350x360x390 mm
Outside dimensions: 590x460x620 mm 
Doors: n.1
Wattage: 750W
Weight: 34 kg